AVRISP SA2

Introduction

The AVRISP SA2 of Stand Alone 2 Series is an effective AVR devices In-system Programmer which can stand-alone operation requires no HOST PC.
It can stand-alone program flash, EEPROM, fuse an lockbit, serial number, write Oscillator Calibration Byte. It also can limit stand-alone operation times.
The AVRISP SA2 combined with AVR Commander can save all Programming configuration and files as a Project file.

AVRISP SA2 Highlights

- Limit programming times with password protection counter
- Auto serial number generation and write
- Auto speed adjustment to best performance
- Faster than AVRISP mkII, especially in offline model

*The Quality: Zero Malfunction Rate! (Peroid: Jul/2009 ~ Mar/2010)

AVRISP SA2 features

- Supports all AVR devices with ISP interface
- Stand-alone In-system Programming, One-Key-Programming
- Flash an EEPROM buffers are editable
- Security and Fuse Bit programming supported
- Automatic part serail number generation, in Flash or EEPROM memory
- Standard 10-pin and 6-pin connection to target (see the ISP Header Document.)
- USB 2.0 compliant
- On-Line mode, powered from USB, does not require external power supply
- Stand-alone mode, powered from DC adapter connected by USB cable
- Short-circuit protection
- Extensive on-line help
- Upgradeable to support future devices

The AVRISP SA2 is supported by AVR Commander. (We will send you the download link of Updated versions of AVR Commander when you purchased)

The package includes the following items:
1, AVRISP SA2
2, 10pin-10pin-6pin Probe Adapter Cable
3, Mini USB Cable
4, 5V, 500mA DC adapter, USB interface output
5, CD ROM (For Green Earth, only available on request)

 

Downloadable Files:

Quick Installation Guide: http://file.chinics.com/document/Chinics_Products_Instruction_AVRISP_SA2_EN.pdf

Software for SA2:
RAR package (7.10M): http://file.chinics.com/software/AVRProgrammer209.rar
ZIP package (7.16M): http://file.chinics.com/software/AVR_Programmer_2_09_setup.zip
Original EXE (7.77M): http://file.chinics.com/software/AVR_Programmer_2_09_setup.exe
System Requirement: Windows XP.

Installation Guide:
http://file.chinics.com/document/Chinics_Products_Instruction_AVRISP_SA2_EN.pdf
Chapter 1.5
IMPORTANT NOTICE:
Please make sure to follow the installation instructions, INSTALL SOFTWARE FIRST, then connect SA2 to your pc, that you can install drivers when windows prompts.
 

Real Photo:

They are using AVR Pro SA2 since 2007:

And more brand.